重慶升降機不允許偏載，不允許超載，這是客戶在購買機器的時候，我們廠家不斷提醒的一個問題。偏載會給我們的設備或者高空作業人員帶來那些危害呢？具有什么樣的危險性呢？Chongqing lift does not allow partial load, not allowed to overload, which is the customer in the purchase of the machine, we continue to remind the manufacturers of a problem. Partial load will give our equipment or high-altitude workers who bring harm? What are the risks?

我們知道重慶升降機是由液壓油缸頂起來的，如果一邊載重較大，輕者會造成機器的單邊磨損加大，嚴重的可能就會造成機器的側翻。We know that Chongqing is composed of the hydraulic cylinder lifts up, if the side load is large, unilateral wear increase light will cause the machine, may cause the severe rollover machine.

特別是舊的機器，設備由于使用時間過長，自身的承重下降，如果再偏重的情況下，很容易直接側翻，給機器和作業人員的安全帶來一定的危險性。我們?cè)谑褂弥貞c升降機的時候一定要遵守安全操作規程。Especially the old machine equipment, due to the use of time is too long, its bearing down, if the emphasis of the case, it is easy to direct rollover, bring some risk to the machine and the safety of the workers. We must comply with safety procedures when using the Chongqing lift.

也有些客戶會問，如果我上一個人進行重慶升降機操作難道只能站在中間不能動嗎？這個倒不是這樣定義的，偏載的定義是在一邊重量較為集中，而邊一邊則沒有承重。如果單個人上去的話正常移動作業則不會造成什么危險。Some customers will ask, if I lift a person on the Chongqing lift operation can only stand in the middle can not move? This is not the case, the definition of load is in the side of the weight is more concentrated, while the side without bearing. If a single person to move the normal operation will not cause any danger.